Remote Microphone
A RM6 remote pa
ging microphone station can be connected to the PR-Series mixer-amplifiers. The RM6 remote
microphone station can select from the 6 individual zones and play a pre-announcement chime.
The RM6 remote microphone station should be connected using UTP CAT5/6, CAT6 is recommended for longer
distance. Up to four (4) RM6 remote microphone stations can be daisy-linked using the Link port. The maximum
distance between the RM6 remote microphone station and the PR-Series mixer-amplifier is 200m.
[Figure 3.3]
CAUTION : This port is not a network terminal. Do not connect to a network device.
Using Music on Hold (M.O.H.)
The PR-Series mixer-amplifiers include a MOH (Music on Hold) function allowing you to connect the PR-Series to a
business telephone system. With MOH, when customers call in to the business and are put on hold, they hear
background music from an external source or from the internal media player if the optional BMP-1 (Bluetooth, tuner,
and Media player module) is installed. You can make the call-in experience more pleasant or take advantage of
valuable time by playing a pre-recorded commercial message using MOH.
You can set the volume of the MOH signal using the MOH Level control.
[Figure 3.4]
– 15 –
PR-130A / PR-240A
REMOTE MIC
To Next Page
Loading...
Need help?
General
