Quick Charge SPARK EPA1205 User Manual

Failure to unplug AC power or DC connections before moving or
driving equipment will result in damage to cords, plugs and
receptacles.
OPERATION:
Using the battery clips, or the ring terminal attachment, observe
polarity and, connect the spark to the battery.
Plug the Spark into any 120-240 volt receptacle.
Below is an interpretation of the LED’s during normal operation:
OTHER INTERPRETATIONS:
A rapid flashing of all the LED’s means the connections are
reversed. Unplug AC power, reverse connections, and plug back
in.

Quick Charge SPARK EPA1205 Specifications

General

Brand	Quick Charge
Model	SPARK EPA1205
Category	Battery Charger
Language	English