Quick Charge SPARK EPA1205 User Manual

O P E R A T I N G I N S T R U C T I O N S
SPARK BATTERY CHARGER & MAINTAINER
Model EPA1205
Designed for lead acid batteries
INTRODUCTION:
The Spark is designed to charge and maintain all lead acid
automotive/marine 12 volt batteries. The Spark can be left
connected for extended periods of time without harm to the
battery. The Spark prevents sulfation which shortens battery life.
See the back label for the output ratings of your Spark. Model
EPA1205 is not for use on motorcycle, or lawn and garden
batteries.

Quick Charge SPARK EPA1205 Specifications

General

Brand	Quick Charge
Model	SPARK EPA1205
Category	Battery Charger
Language	English

Summary

OPERATING INSTRUCTIONS

INTRODUCTION

Details the Spark charger's purpose for lead-acid batteries, preventing sulfation and its limitations.

BATTERY SAFETY & CARE INFORMATION

OTHER SAFETY INFORMATION

OPERATION

LED Interpretation

Explains the meaning of LED indicators during normal operation and error states.

Reverse Connections

Describes how to identify and correct reversed polarity connections based on LED behavior.

TROUBLESHOOTING

No LED's

Guidance on checking connections or battery voltage when no LEDs illuminate.

Low Battery Voltage

Procedure for jump-starting a battery with voltage too low for the charger to activate.

LIMITED WARRANTY