Quick BTR185 Series - Page 25

EN
BTR185 INSTALLATION AND USE MANUAL - REV009A
25
BTR185INDEX
1 - Information about the product Pag. 26
1.0 - Installation requirements Pag. 26
1.1 - Technical data Pag. 26
2 - Supplied parts Pag. 27
2.0 - Package contains the following parts Pag. 27
2.1 - Tools needed for installation Pag. 27
2.2 - Quick
®
”accessories recommended Pag. 27
3 - Safety Pag. 27
3.0 - Warnings Pag. 27
4 - Installation Pag. 28
4.0 - Thruster positioning Pag. 28
4.1 - Counter ange’s installation Pag. 29
4.1 - Counter ange’s installation Pag. 30
4.1 - Counter ange’s installation Pag. 31
4.2 - Closing lid’s preparation and installation Pag. 32
4.2 - Closing lid’s preparation and installation Pag. 33
4.3 - Thruster’s installation Pag. 33
4.4 - Mechanical system check and adjustmen Pag. 34
4.5 - Installation of the cable in the lid Pag. 34
4.6 - Adjustment procedure Pag. 35
4.7 - Actuator’s adjustment Pag. 36
4.8 - Installation of the springs’ limit switch wires Pag. 36
5 - Connection diagram Pag. 37
5.0 - BTR185 basic system Pag. 37
5.1 - RTC R1 board Pag. 38
6 - Operation Pag. 39
6.0 - Option selection Dip-Switch Pag. 39
6.1 - Actuator current rotary switch Pag. 39
7 - Notication Pag. 40
7.0 Notification signs Pag. 40
8 - Warning Pag. 41
8.0 - Warnings Pag. 41
9 - Usage Pag. 41
9.0 - Use of the retractable thruster Pag. 41
Emergency closing Pag. 42
Maintenance Pag. 42
Spare parts pag. 44
Retractable thruster dimensions Pag. 45