QUICKCLOCKS QC500N - Setting Printing Positions

- 14 -
4.13 Setting printing position (Up/Down)
Press Enter or Back to enter the program code 07,
Press + or – button to set the printing position <0~9>
Press Enter again to register the setting value.
Higher value, printing moves upward, lower value,
printing moves downward.
4.14 Setting printing position (Left/Right)
Press Enter or Back to enter the program code 08,
press + or – button to set the printing position <0~9>
Press Enter again to register the setting value.
4.15 Setting the regular time signal (0-99Seconds)
Press Enter or Back to enter the program Code 10,
Press Enter again to register the setting value.
Press + or – button to set time signal duration and
the initial value (10 seconds) will appear.
The duration can be set from 0~99 seconds,
Press Enter again to register the setting value