QUICKCLOCKS QC500N - Setting Time Signals

- 15 -
4.16 Setting the time signal
Press Mode key to select the program b002
Press Enter again to register the setting value.
Press Enter or Back to enter the program Code 01
Press Enter again to register the setting value.
Press + or – button to set the Hour.
Press Enter again to register the setting value.
Press + or – button to set the Minute.
Press Enter again to register the setting value.
Press + button to set the week.
Press – button to cancel the week.
Press Clear button to set everyday,
Doing the same as above to enter code 02~24 and
complete the setting of 2
nd
~24
th
ring times if necessary.
4.17 Setting the shifting time
Press Mode key to select the program b003
Press Enter again to register the setting value.
Press Enter or Back to enter the program Code 01,
Press + or – button to set the Hour.
Press Enter again to register the setting value.
Press + or – button to set the Minute.
Press Enter again to register the setting value.
Press + button to set the week.
Press – button to cancel the week.
Press Clear button to set everyday,
Doing the same as above to enter code 02~18 and
complete the setting of 2
nd
~ 18
th
shifting times if necessary.