Quickie sr45 - N.frame Width; O.seat Pan

118611 Rev. D
23
SR45
N. FRAME WIDTH
The frame of the SR45 is built to accommodate growth by using the growth kit components.
1) Fixed Strut Tube Width Adjustment (Rocker assembly)
a. Remove the bolts (A) from both ends of the strut tubes (B) for all strut tubes.
b. Replace with the appropriate length strut tubes
c. Tighten the bolts (A) at each end.
d. Repeat for each strut tube (B).
NOTE–
Use a torque setting of 200 in.-lbs. when tightening hardware (A).
2) Fixed Strut Tube Width Adjustment (Roller assembly)
a. Remove the bolts (C) from both ends of the strut tubes (D) for all strut tubes.
b. Replace with the appropriate length strut tubes
c. Tighten the bolts (C) at each end.
d. Repeat for each strut tube (D).
NOTE–
Use a torque setting of 200 in.-lbs. when tightening hardware (A).
O. SEAT PAN
The seat pan of the SR45 is designed to accommodate depth adjustment.
Depth adjustment
a. Loosen and remove all bolts (E).
b. Adjust the seat pan to the desired depth.
c. Replace and tighten all bolts.
NOTE
– Use the holes that place the bolts as far away from each other as possible.
Width adjustment
a. Loosen and remove all bolts (E).
b. Adjust chair to the desired width.
c. Replace and tighten all bolts.
4544
46
IX. DEALER SERVICE & ADJUSTMENT
44
45
A
D
B
C
C
46
E