Quickie QM710 - User Manual

Questions and Answers

R
Rhonda CarrollAug 20, 2025
What to do if the battery gauge flashes rapidly on my Quickie Wheelchair?
- K
  Katie WeberAug 20, 2025
  If the battery gauge on your Quickie Wheelchair flashes rapidly, it means the controller has detected an electrical problem. To address this, switch off the control system and ensure all connectors are securely in place. Also, check the condition of the battery. If the problem persists, switch off the Quickie Wheelchair and contact your Sunrise Medical authorized dealer.
M
Mrs. Ashley Edwards DVMAug 22, 2025
Why does FAULT CODE 1 appear on my Quickie Wheelchair?
- T
  Tina BeasleyAug 22, 2025
  If FAULT CODE 1 appears on your Quickie Wheelchair, it indicates that the batteries need charging or there is a bad connection to the battery. First, check the connections to the battery to ensure they are secure. If the connections are good, try charging the batteries.
J
john78Aug 25, 2025
What does FAULT CODE 9 mean on a Quickie QM710?
- G
  Gary ShannonAug 25, 2025
  FAULT CODE 9 on your Quickie Wheelchair indicates a bad connection with the parking brakes. Check the parking brake and motor connections to ensure they are secure. Also, verify that the control system connections are properly connected.
D
Daniel RogersAug 27, 2025
What does FAULT CODE 2 mean on my Quickie QM710 Wheelchair?
- R
  Roger SmithAug 27, 2025
  FAULT CODE 2 on your Quickie Wheelchair means the left hand motor has a bad connection. Check the connections to the left hand motor to resolve this issue.
R
ramirezreginaldAug 28, 2025
What does FAULT CODE 4 mean on a Quickie QM710 Wheelchair?
- K
  Kenneth KhanAug 28, 2025
  If FAULT CODE 4 appears on your Quickie Wheelchair, it indicates a bad connection to the right hand motor. To fix this, check the connections to the right hand motor.
D
David WilsonAug 30, 2025
What does FAULT CODE 7 mean on my Quickie QM710?
- E
  eugenemaciasAug 30, 2025
  If FAULT CODE 7 appears on your Quickie Wheelchair, it indicates a joystick fault. Ensure that the joystick is in the center position before switching on the control system.
L
Lisa JosephSep 1, 2025
What does FAULT CODE 8 mean on a Quickie Wheelchair?
- A
  Angela BurchSep 1, 2025
  FAULT CODE 8 on your Quickie Wheelchair indicates a control system fault. Make sure the control system connections are secure.
R
richard70Sep 3, 2025
What does FAULT CODE 10 mean on a Quickie QM710 Wheelchair?
- C
  charlesnicholsSep 3, 2025
  FAULT CODE 10 on your Quickie Wheelchair indicates that an excessive voltage has been applied to the control system, usually caused by a poor battery connection. Check the battery connections to resolve this issue.
C
Christopher SheltonSep 5, 2025
What does FAULT CODE 10 + S mean on my Quickie Wheelchair?
- D
  David MoodySep 5, 2025
  If FAULT CODE 10 + S appears on your Quickie Wheelchair, it indicates a communication fault. Ensure that the joystick cable is securely connected and is not damaged.
A
Alexandra HillSep 7, 2025
Why is the Speed/Profile Indicator flashing on my Quickie QM710?
- M
  Martin BrownSep 7, 2025
  The flashing Speed/Profile Indicator on your Quickie Wheelchair usually indicates that the seat is elevated. The exact cause will depend on the build of the chair.

Summary

User Information

Indications, Contraindications, and Benefits

Discusses user conditions, therapy benefits, contraindications, and benefits of daily standing.

General Safety Warnings and User Tips

General Warnings and Kerbs

Important safety advice on operation, kerbs, and user adjustments.

Emergency Braking, Sharp Turns, and Batteries

Safety on emergency braking, sharp turns, battery handling, and charging.

Weight Limit, Motors, Range, and Road Use

Information on weight limits, motor heat, wheelchair range, and safe road usage.

Adverse Conditions, Ramps, and Transfers

Precautions for adverse conditions, ramp use, and safe transfers to/from the chair.

Stand Up Module and Slopes

Warnings for stand up module, slope use, ascents, and descents.

Castors, Slope Use, Gradients

Vehicle Lifts, Creep Mode, and Stability

Safety for vehicle lifts, creep mode, and factors affecting wheelchair stability.

Swing Away Tray and Kerb Climbing

Dismounting the Kerb and Lap Strap

Procedures for dismounting kerbs and detailed instructions for lap strap use.

Preparing your wheelchair for use

Handling, Re-Assembly, and Emergency Freewheel

Instructions for handling, re-assembly, and using the emergency freewheel mechanism.

Leg Rests and Foot Plates

Powered Leg Rests and Backrest

Powered Seat Lifting and Tilting

Leg Rests and Front Knee Fixation

Stand Up and Related Functions

Chest Strap Height and Standing Function

Instructions for chest strap height and operation of electric standing function.

Seat Memory Position and Retrieval

Return to Drive Mode and Saving Memory Positions

Deleting Memory Positions and Troubleshooting

Troubleshooting The R-net Control

Battery Gauge Status and System Trips

Interpreting battery gauge indicators and understanding system trip causes.

Self Help Guide and Movement Issues

Using the self-help guide, troubleshooting slow movement, and indicator flashes.

R-net Control System

R-net System Information

Controller Mounts

General Warnings and Swing-Away Arm

Speciality Controls

Proximity Head Array and Driving

Head Controls, Sip;Puff, and MicroGuide Joystick

Proportional Chin Control and MicroPilot Joystick

Batteries and Charging

Battery Location and Removal

Safety Cut-outs, Battery Statements, and Care

Battery Care Plan and Charger Information

Charger Connection and Operation

Step-by-step instructions for connecting the charger and understanding charging indicators.

Transportation

Transportation Warnings and Child Safety

Warnings for vehicle transport, access, seating, and child safety recommendations.

Occupant Restraint and Tie Down Restraint Positioning

Instructions for occupant restraint and positioning tie-down restraints for transport.

Train Use, Other Transport, Shipping, and Storage

Maintenance and Cleaning

Tyre Maintenance, Pressure, and Wear

Connecting Battery Cables

Storage, Service Agents, and Maintenance Routines

Maintenance & Inspection Schedule

A schedule outlining daily, weekly, quarterly, and annual maintenance tasks.

Specification sheets (EN 12184 & ISO 7176-15)

Model: Quickie Jive Up; QM-710 Stand Up

Technical specifications including dimensions, mass, and performance data.

ADDENDUM 2.0

User Instructions for the Upper Chest Strap

Chest Strap Positioning, Adaptation, and Safety

Usage and Maintenance of Chest Strap

Quickie QM710 Specifications

General

Type	Power Wheelchair
Top Speed	6 mph
Battery Size	Group 24
Ground Clearance	3"
Frame Material	Aluminum
Folding	No
Front Wheel Size	6"
Weight Capacity	300 lbs
Battery Capacity	73 Ah
Overall Width	24.25"
Rear Wheel Size	14"