Quickie QM710 - Maintenance & Inspection Schedule

Jive Up / QM-710 Stand Up 53
Rev.2.0
WARNING!
• If you are in any doubt about the performance
requirements of your wheelchair contact your Sunrise
Medical authorised dealer.
• After performing any maintenance or repairs on the
wheelchair you must make sure that it is functioning
correctly before it is used.
• A complete inspection, safety check and service
should be made by a Sunrise Medical authorised
dealer at least once per year.
• All fasteners must be replaced like for like using the
correct length, tensile strength and materials.
• When replacing self-locking nuts, or nuts/studs
secured with a thread locking solution, ensure that
a suitable thread locking solution is reapplied to the
fastener.
Maintenance & Inspection Schedule
Daily*
Weekly
Quarterly
Annually
Check battery level indicator and charge if necessary
¯
Check the joystick of the hand control is not bent or damaged
¯
Ensure all parts and assemblies are securely fastened
¯
Checkanterior pelvic support for wear and make sure the buckle is
operational
¯
Motor Brake Test
¯
Check tyre condition and wheel fasteners.
¯
Ensure lights and indicators, (where fitted), are operational and
clean
¯
Ensure all cables and connectors are sound and are tidy and out of
the way
¯
Check upholstery, seating, headrests, arm pads and calf pads for
wear.
¯
Inspect all nuts, bolts, studs and fasteners for damage and tightness.
Contact your authorised dealer for service assistance.
¯
Clean wheelchair upholstery
¯
Check battery terminals for tightness etc.
¯
Complete inspection, safety check and service should be made
by a Sunrise Medical authorised dealer
¯
Daily = Before each use of the wheelchair.
*