(
ADDENDUM 2.0
ADDITIONAL INFORMATION TO THE OWNERS MANUAL FOR THE JIVE UP /
QM-710 STAND UP
Important!
Please make sure that this additional information is always supplied with the chair if not already
available in the standard Owners Manual.
User Instructions for the upper chest strap on the JIVE UP / QM-710 STAND UP
To assemble the chest strap the following tool is required: 5mm Allen key.
ATTENTION!
The chest strap may only be assembled and adapted by an authorized dealer.
ATTENTION!
Before operating the stand-up function on the Jive UP / QM-710 STAND UP the chest strap and the
positioning belt, supplied as standard with the Jive UP / QM-710 STAND UP, have to be buckled in accordance with
the user instruction supplied with the chair. Always also use the knee fixation for the stand-up procedure.
WARNING!
Due to the risk of choking it is extremely hazardous to use the belts without using the knee fixation.
Assembling the belt into the bracket s supplied to adjust the length:
56 Jive Up / QM-710 Stand Up
Rev.2.0
To Next Page
Loading...
