Dimensions: a=height; b=length; c=width
1- BEFORE INSTALLING THE AUTOMATION
Before installing the automation, you must check that:
- The wheels of the gate are attached to make the gate stable and must be in good condition;
- The entire length of the fixed rail must be free of obstacles, straight and clean and have stoppers at the
ends;
- The upper guide, must be parallel to the rail and lubricated, and it must allow for a clearance of about 1
mm from the door
Borinato F.lli Snc is liable only for products it manufactures and commercializes. Once automated, the gate
becomes a machine and is therefore subject to the rules of the “ Machinery Directive”. It is on the installer to verify
its security. WARNING: Borinato F.lli Snc is not liable for any damages to people, animals or things due to
unauthorised modifications, alterations or betterments on its products by third parties.
To Next Page
Loading...
Need help?
General
