27
FLUID PARAMETERS
Quinsyn
®
, Quinsyn
®
IV & Quinsyn
®
F
Property Units Test Method New Fluid Marginal Unacceptable
Viscosity 40°C cSt ASTM D-445 42-48 38, 52 <38, >52 (1)
Acid No. TAN mg KOH/gm ASTM D-947 0.1 0.8-0.9 >1 (1)
ADDITIVE METALS
Barium PPM Plasma Emission 0 5-20 >20
Calcium PPM Plasma Emission 0 5-20 >20
Magnesium PPM Plasma Emission 0 5-20 >20
Molybdenum PPM Plasma Emission 0 5-20 >20
Sodium PPM Plasma Emission 0 5-20 >20
Phosphorus PPM Plasma Emission 0 5-20 >20
Zinc PPM Plasma Emission 0 100-200 >200
WEAR METALS
Silver PPM Plasma Emission 0 5-10 >10
Aluminum PPM Plasma Emission 0 5-10 >10
Chromium PPM Plasma Emission 0 5-10 >10
Copper PPM Plasma Emission 0 5-10 >10
Iron PPM Plasma Emission 0 5-10 >10
Nickel PPM Plasma Emission 0 5-10 >10
Lead PPM Plasma Emission 0 5-10 >10
Tin PPM Plasma Emission 0 5-10 >10
Titanium PPM Plasma Emission 0 5-10 >10
Vanadium PPM Plasma Emission 0 5-10 >10
OTHER
Silicion PPM Plasma Emission 0 10-15 >15
Water PPM Karl Fisher <75 200 >200
Particle Count Microns Hiac Royco ISO CODE X/20
Antioxidant % Liquid Chromatography 100 NOT REPORTED
NOTE:
(1)
The fluid will be condemned based on these parameters.
To Next Page
Loading...