Page 3For technical questions, please call 1-888-866-5797.Item 58950
Important Safety Information
WARNING Read all safety warnings
and instructions.
Failure to follow the warnings and
instructions may result in injury.
Save all warnings and instructions
for future reference.
1. The warnings, cautions, and instructions
in this instruction manual cannot cover all
possible conditions and situations that may
occur. It must be understood by the operator
that common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
2. Wear ANSI-approved safety
goggles during use.
3. Do not use for loosening fasteners.
4. Use only within rated torque range.
5. Use as intended only. Do not
use as hammer or pry bar.
6. Do not use a Torque Screwdriver that
has been dropped. Have it tested
before putting back into use.
7. Have the Torque Screwdriver calibrated and
serviced only by a qualified technician.
8. Inspect before every use; do not use
if damaged or if parts are loose.
9. Keep away from children.
10. Use only bits with the correct drive and rated
to at least the torque that will be applied to it.
To Next Page
Loading...