Page 6 For technical questions, please call 1-888-866-5797. Item 64915 64916
Maintenance and Servicing
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the
problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. AFTER USE:
Wipe Wrench with a clean cloth. Do not use
liquid on the cloth or immerse wrench in liquid.
3. EVERY 6 MONTHS, have the Torque Wrench
calibrated and serviced by a qualified technician.
4. Remove batteries before storage.
Note: Replacement parts are not available.
To Next Page
Loading...
