Why is my Quinton Treadmill popping during grade change?
If your Quinton Treadmill is popping during grade changes, it is likely due to faulty elevation chain alignment. Adjust the alignment of the sprockets.
How to fix E105 error on Quinton Treadmill?
To resolve the E105 error code on your Quinton Treadmill, re-initialize the NVRAM: 1. Press Stop, Faster, and Slower to enter Service Mode. 2. Press Stop and Cool Down to reinitialize. 3. Press Clear. 4. Reconfigure the controller (see "Configuring the Controller" on page 4-26). If the error persists, replace the controller.
What to do for E201 error code on Quinton Treadmill?
To resolve the E201 error code on your Quinton Treadmill: 1. Enter service mode. 2. Calibrate POT. 3. If the error persists, replace POT. 4. If the error still persists, replace the AC Drive Module.
General| Display | LCD |
|---|---|
| Maximum Speed | 12 mph |
| Incline Range | 0 to 15% |
| Speed Range | 0.5-12 mph |
| Power Requirements | 120V |
Describes the treadmill's walking surface, speed, grade, and controller.
Lists key components of the treadmill, such as the controller and walking belt.
Overview of the controller panel and its primary functions.
Detailed explanation of the function of each key on the controller.
Explanation of the various displays and LED indicators on the controller.
Instructions for configuring the treadmill's speed range via the controller.
Details on limited access, time limits, and speed limits for the treadmill.
Lists available accessories for the treadmill, such as handrail kits.
Essential safety precautions for operating the treadmill.
Procedure to activate and deactivate the limited-access feature using a magnetic key.
How to set and deactivate time limits for treadmill use.
How to set and deactivate speed limits for treadmill use.
Instructions for safe mounting and dismounting procedures.
Daily checks for wear, belt position, and potential hazards.
Procedures for cleaning the treadmill's exterior, interior, and disinfection.
Steps for adjusting belt tension and belt tracking.
A guide to common problems, their causes, and remedies.
General safety warnings and cautions for operating the treadmill.
Electromagnetic compatibility (EMC) declaration tables for emissions.
Details performance metrics like load, speed, grade, and acceleration.
Details physical dimensions, weight, and walking surface size.
Specifies environmental ranges and power supply requirements.
Details controller specs for speed, grade, displays, and indicators.
Includes speed vs weight range, grade vs angle, and angle/grade charts.
Instructions for verifying received items and inspecting for damage.
Recommendations for installation, contacting reps, and site needs.
Step-by-step instructions for installing the treadmill and its hood.
Overview of the controller, power key, and default displays.
Details on Units, Start Belt, Up/Down, Faster/Slower, +/-, Clear keys.
Explains the function of Select, Cool Down, and Stop Belt keys.
Explains Limited Access, Time Limit, and Speed Limit controls.
Describes the Grade, Speed, and Multifunction displays.
Explains the function of LEDs like Enter Weight, Enter Time, MPH, KM/H.
Explains caution symbols and electrical safety related symbols.
Explains symbols for controls, warnings, and measurement units.
To Next Page
