Quooker AC+HF - Fitting Cold Water Filter bracket; Positioning the bracket; Fitting the bracket; Securing the Cold Water Filter

1
3
2
1. Positioning the bracket
Make sure that the bracket is positioned
at least 2 inches or 5 centimeters from
theundersideofthesinkorworksurface,
withatleast10inchesor25centimeters
ofspacebetweenthebaseofthebracket
and the base of the cabinet.
2. Fitting the bracket
Installonescrewattheselectedlocation
and mount the bracket.
3. Securing the Cold Water Filter
Securethebracketwiththetwo
remainingscrews.
A
Fitting Cold Water Filter bracket
3
min. 10"
min. 25 cm
min. 2"
min. 5 cm