Need help?Do you have a question about the Quooker Combi E and is the answer not in the manual?
General| Brand | Quooker |
|---|---|
| Model | Combi E |
| Category | Water Heater |
| Language | English |
Explains how the Quooker COMBI E supplies boiling and hot water, its heating process, filtration, and mixing valve.
Covers installation location, tank orientation, filter replacement, cleaning, and warranty terms.
Details who can use the tap, suitability for commercial use, and general usage precautions.
Lists directives and standards the Quooker COMBI E complies with, signed by the director.
Provides detailed technical data for the tank and tap types, including voltage, capacity, dimensions, and energy efficiency.
Lists the components included in the Quooker COMBI E package for different tap types.
Summarizes the installation process for the Nordic tap, including drilling, connecting water, waste, and tank.
Summarizes the installation process for the Fusion tap, including drilling, connecting water, waste, and tank.
Summarizes the installation process for the Flex tap, including drilling, connecting water, waste, and tank.
Details the correct hole sizes and positioning for installing the Nordic, Fusion, and Flex taps.
Describes the process of fitting the Nordic single tap through the worktop and securing it.
Outlines the steps for fitting the Fusion tap through the worktop and securing it, including thin worktops.
Details how to fit the Flex tap, including connecting hoses, passing through the worktop, and securing.
Explains how to connect the water supply, including pressure reducing valve, inlet combination valve, and mixing valve.
Covers the process of connecting the waste water hose to the drain, including creating a u-bend.
Details connecting the Quooker tank electrically, filling it, and switching it on for the first time.
Provides instructions on how to safely switch off, drain, isolate, and disconnect the Quooker tank.
To Next Page
