65
7
5. Attach the coupling
Click the pull-out hose into the coupling’s
quick-release tting while ensuring that
the hose pillar is fully inserted.
6. Fit the mixer water hose
Click the mixer water hose into the
coupling’s quick-release tting while
ensuring that the hose pillar is fully
inserted.
7. Connect
Place the hose screens in the ends of the
hot and cold water supply pipes. Connect
the hot and cold water hoses to the pipes.
If necessary
Detach coupling. Use the quick-release
tool to detach the mixer water hoses from
the coupling. Press the quick-release tool
at against the coupling to hold it still.
This enables the hose to be extracted.
To Next Page
Loading...
