7
4.2 CHECK THE CONNECTION BETWEEN THE QVIART OG/OG 4K AND YOUR TV
Once the configuration is finished you should see the Main Menu:
If there is a red light on the Display of the decoder, press the Power button on your Remote
Control and wait for the receiver to start.
Once the receiver is ON (green led light in the display), you should see the menu on your TV and
be able to scroll.
If you still do not see the menu on your screen, maybe you are not using the correct HDMI input,
change it from your TV RCU and select the HDMI input where you have connected the receiver.
4.3 HOW TO SET UP LAN CONNECTION
Connect the internet Cable to the receiver and go to Settings / Network Settings / LAN Settings
(if an IP Address is shown, the connection is correct):
If there is a 0, press the red button (Manual Setup), choose the DCHP option and press OK (Save).
4. Setting up a TV box
To Next Page
Loading...
Need help?
General
