To Next PageTo Next Page
Need help?Do you have a question about the RAB Lighting STEALTH 110 and is the answer not in the manual?
Details on switching capacity, voltage, power consumption, and detection parameters.
Essential warnings for safe and proper installation of the STEALTH motion sensor.
Explanation of the infrared sensor's motion detection and automatic light control mechanism.
Guide to configuring the control panel for desired time delay, sensitivity, and photocell functions.
Recommendations for mounting the sensor to achieve maximum coverage and detection range.
Explanation of the red LED's function in indicating sensor status and operation modes.
Details on the sensor's detection pattern and coverage zones for different lenses.
Illustrations for basic and multiple fixture wiring configurations for the STEALTH sensor.
Advice on circuit types and potential issues affecting sensor performance and reliability.
Step-by-step guide for aiming the sensor and testing its coverage and detection functionality.
Solutions for lights turning on unexpectedly due to environmental factors, temperature changes, or interference.
Addresses issues where the sensor fails to turn lights off after motion has ceased.
Resolves problems with lights turning on or off at wrong times or in an erratic manner.
Diagnoses why the sensor fails to activate the lights when motion is detected.
Identifies causes for lights shutting off prematurely after activation.
Addresses issues where the sensor's detection area is smaller than expected.
Details on product repair, replacement policy, and limitations of liability.
Details on switching capacity, voltage, power consumption, and detection parameters.
Essential warnings for safe and proper installation of the STEALTH motion sensor.
Explanation of the infrared sensor's motion detection and automatic light control mechanism.
Guide to configuring the control panel for desired time delay, sensitivity, and photocell functions.
Recommendations for mounting the sensor to achieve maximum coverage and detection range.
Explanation of the red LED's function in indicating sensor status and operation modes.
Details on the sensor's detection pattern and coverage zones for different lenses.
Illustrations for basic and multiple fixture wiring configurations for the STEALTH sensor.
Advice on circuit types and potential issues affecting sensor performance and reliability.
Step-by-step guide for aiming the sensor and testing its coverage and detection functionality.
Solutions for lights turning on unexpectedly due to environmental factors, temperature changes, or interference.
Addresses issues where the sensor fails to turn lights off after motion has ceased.
Resolves problems with lights turning on or off at wrong times or in an erratic manner.
Diagnoses why the sensor fails to activate the lights when motion is detected.
Identifies causes for lights shutting off prematurely after activation.
Addresses issues where the sensor's detection area is smaller than expected.
Details on product repair, replacement policy, and limitations of liability.
General| Category | Security Sensors |
|---|---|
| Voltage | 120V |
| IP Rating | IP65 |
| Sensor Angle | 180° |
| Power Supply | Hardwired |
| Material | Aluminum |
| Operating Temperature | -40°C to 40°C |
| Sensor Type | PIR |
| Detection Range | 30 ft (9 m) |
| Light Control | Dusk-to-Dawn |
| Mounting Type | Wall |
