Need help?Do you have a question about the RAB Lighting STL12LV and is the answer not in the manual?
Explains how long lights remain on after motion detection, adjustable from 5 seconds to 12 minutes.
Details manual override (keep lights on) and automatic mode settings using the light switch.
Describes how to mask the lens to reduce detection area or sensitivity.
Explains the adjustment controls for time, sensitivity, and photocell for optimal operation.
Guides users through testing and adjusting the sensor's coverage pattern and sensitivity.
Explains how long lights remain on after motion detection, adjustable from 5 seconds to 12 minutes.
Details manual override (keep lights on) and automatic mode settings using the light switch.
Describes how to mask the lens to reduce detection area or sensitivity.
Explains the adjustment controls for time, sensitivity, and photocell for optimal operation.
Guides users through testing and adjusting the sensor's coverage pattern and sensitivity.
General| Category | Security Sensors |
|---|---|
| Watts | 12W |
| CRI | 80 |
| Coverage/Motion Sensor Angle | 180° |
| IP Rating | IP65 |
| Material | Aluminum |
| Color Temperature | 5000K |
| Detection Range | 30 ft |
| Mounting | Wall |
| Sensor Type | PIR |
| Finish | Bronze |
To Next Page
