6
3 Installation
3.1. Positioning of the controller
Remove the foil on one side of the adhesive dot and stick it to the round base. Position the
controller so that it is clearly visible and easy for the driver to reach. For legal reasons, the pas
-
senger must not have access to the mounted controller while driving!
A
Once you have selected a suitable location, peel off the second protective lm from the adhesive
dot and attach the controller to the dashboard.
Make sure that the surface is clean and free of grease.
Positioning on the dashboard to the left of the steering wheel.
A
• The controller must not interfere with the operation of, or visibility to, any other
controls on your car.
To Next Page
Loading...