Need help?Do you have a question about the Racelogic VBOX LITE and is the answer not in the manual?
Instructions for mounting the GPS antenna for optimal signal reception.
Connecting the GPS antenna, power cable, and microphone to the Video VBOX LITE.
Securely attaching cameras and connecting the microphone for audio input.
Memory card insertion, satellite lock acquisition, and recording mode.
Critical information on SD card removal, USB cable usage, and mobile phone software.
Details on connecting the power cable and GPS antenna to the unit.
Explanation of the functionality of each LED on the Video VBOX LITE.
How to log a single CAN parameter and use it in the video overlay.
Using lap-timing parameters for visualization in the video overlay.
Description of the two supported logging modes: Log Only When Moving and Manual Logging.
Details on how the Video VBOX LITE manages files on the SD card.
Options for selecting the CAN bus baud rate (125, 250, 500 Kbit, 1 Mbit).
Selection of CAN modes: VCI, Racelogic, and Send Acknowledge.
Manually entering CAN parameter info when no database is available.
Choosing channels from input modules for logging within the Video VBOX LITE.
Steps to define start/finish lines and up to 20 split points using VBOX Tools software.
Method for creating circuit overlay files by driving around the circuit.
Steps to create a gauge element, including background and needle setup.
Steps to create a single bar graph element.
Checklist for resolving issues with satellite lock.
Guidelines for optimal GPS antenna positioning and ground plane.
Steps to diagnose and resolve USB connection problems.
Solutions for COM port conflicts or reservations.
Procedures for recovering corrupted video files.
Ensuring the correct Xvid Codec is installed for video playback.
Troubleshooting continuous beeping due to full SD card or corrupt scenes.
Ensuring correct video codecs are installed for playback.
Checks for full card, correct logging mode, and button presses.
Problems with overlay responsiveness or missing elements.
Troubleshooting scene upload failures and warning beeps.
To Next Page
General
