Raddy WF-100C Lite - Troubleshooting Guide; Indoor and Outdoor Temperature do not agree; Indoor and Outdoor Humidity do not agree; Display console contrast is weak

46
B: Install the collector funnel.
2) Replace the wind, rain and thermo-hygrometer sensor batteries every 1-2 years
16.
Troubleshooting Guide
Problem
Solution
Wireless remote not
reporting in to
console.
There are dashes
(--.-) on the display
console.
If any of the sensor communication is lost, dashes (--.-)
will be displayed on the screen. To reacquire the signal,
press and hold the CHANNEL/+ button for 3 seconds,
choose the lost sensor and the remote search icon will
be constantly displayed. Once the signal is reacquired, the
remote search icon will turn off, and the current values
will be displayed.
The maximum line of sight communication range is 300ft
and 100ft under most conditions. Move the sensor
assembly closer to the display console.
If the sensor assembly is too close (less than 1.5m), move
the sensor assembly away from the display console.
Make sure the remote sensor LCD display is working and
the transmitter light is flashing once per 60 seconds.