32
3. Pull harness adjusting strap
until harness begins to
tighten. If it does not tighten
freely, check the belt path on
the back of the seat bottom is
clear from obstruction.
4. Fasten both of the fabric
side panels on the inside of
the cover.
5. Tuck the red strap through
the center slot between the
upper harness slots.
IMPORTANT: Before
securing your child, make
sure the car seat is locked
in the open position. If not,
repeat instructions from
step one.
3
FIRST SETUP
4
5
To Next Page
Loading...
