76
1. Remove harness (see pg. 70)
2. Undo the three top tabs located
on the back of the car seat cover.
3. Unsnap the four snaps from the
lower back of the car seat shell.
4. Unsnap the four snaps located on
the front of the car seat shell next
to the lower belt guide.
5. Undo the two tabs located on the
bottom of car seat cover.
6. Remove cover o of car seat shell.
To install cover, repeat steps
backward starting at step 5.
IMPORTANT! Remove memory foam
from car seat cover prior to washing.
COVER REMOVAL
2
4
5
To Next Page
Loading...
