diono.com
47
REAR–FACING
6. Attach LATCH/UAS connectors
to vehicle LATCH/UAS anchors
and listen for audible "click" to
conrm engagement.
7. Tighten the LATCH/UAS strap.
With one hand press down
rmly in the center of the
car seat while tightening the
LATCH/UAS strap with the other
hand. You may need to tighten
further by pulling upwards in-
line with the belt path.
8. Test for tightness. Grab the
seat at the bottom of the Rear-
Facing belt path. Try to move
the car seat side-to-side and
front-to-back with the force of
a rm handshake. If the seat
moves less than 1 in (2.5 cm), it
is tight enough.
DO NOT test
by grasping the top or back
of the car seat. Only check by
grabbing at the
rear-facing
belt path opening.
6
7
8
To Next Page
Loading...
