50
REAR–FACING
on the shoulder belt while feeding the slack back into
the retractor.
OR
B.
LAP BELT
To tighten, press down
rmly in the center of the
car seat with one hand
while tightening the lap
belt strap with the other
hand. You may need to
tighten further by pulling
in-line with the belt path.
5. Test for tightness. Grab
the seat at the bottom of
the rear-facing belt path.
Try to move the car seat
side-to-side and front-to-
back with the force of a rm
handshake. If the seat moves
less than 1 in (2.5 cm), it is
tight enough.
DO NOT test
by grasping the top or back
of the car seat. Only check
by grabbing
rear-facing
belt path opening.
4
5
To Next Page
Loading...
