Need help?Do you have a question about the Radiant P1220 POS and is the answer not in the manual?
General| Brand | Radiant |
|---|---|
| Model | P1220 POS |
| Category | Touch terminals |
| Language | English |
Outlines the steps for initial setup, including connecting power, network, and peripherals.
Illustrates and describes the various input/output ports on the P1220 terminal.
Explains how to connect devices using the P1220's four powered RS-232 serial ports.
Details how to connect devices using the P1220's four USB 2.0 host ports.
Provides steps to power on and start the P1220 terminal.
Details the recommended procedures for safely shutting down the P1220 terminal.
Explains how to determine touch screen type and perform calibration if needed.
Covers registry adjustments for touch parameters and capacitive screen settings.
Warns about the risk of explosion if batteries are replaced with incorrect types.
Provides a checklist for diagnosing and resolving hardware issues with the P1220.
Addresses issues like blank screens and no image after touch input.
Guides on troubleshooting hard disk failure messages and errors.
Provides steps to diagnose and resolve issues with the Magnetic Stripe Reader (MSR).
Explains how to test COM ports using HyperTerminal for serial communication issues.
To Next Page
