38
(Continuous) ALERT
— the Weatheradio sounds an
alert and displays an alert description until the alert’s
effective time expires. To turn off the alert sooner,
press
OFF
. To turn on the NWS voice broadcast,
press
WEATHER
.
Note:
When the Weatheradio’s alert ends or you turn
it off, you hear the NWS alert tone (which sounds dif-
ferent than the Weatheradio’s tone) for a few seconds
before you hear the voice broadcast.
The Weatheradio automatically selects the ALERT
setting the first time you turn it on. To change the alert
pattern setting (or check which setting is currently se-
lected), follow these steps.
1. Set
MODE
to
PROGRAM
.
Note:
If you do not press a key for about 45 sec-
onds during Steps 2–4, the Weatheradio exits
the programming mode without storing any
change. To continue, set
MODE
back to
OPER-
ATE
, then start over at Step 1.
2. Press once. The cur-
rently selected alert pattern
(
VOICE
or
ALERT
) ap-
pears.
3. To select the other setting (
VOICE
or
ALERT
),
press . The setting you selected appears.
YES
NO
To Next Page
Loading...
