Settings
Setting Channels
1. Press MENU. SELECT CH appears.
2. Press SELECT and then or to select AUTO (default) or CHANNEL X (where
X is the channel number 1-7).
3. When CHANNEL and a channel number (1-7)
appear, press SELECT to set that channel.
When AUTO appears, press SELECT again to
automatically set to a channel. For auto setting:
• SEARCHING CHANNEL displays during a search, followed by the channel
number (1-7).
• WEATHER CHANNEL X AVAILABLE displays when channel X (1-7) is detected.
• NO CHANNEL AVAILABLE BACK TO CHANNEL X displays when no channel is
detected and the previously selected channel number X displays.
4. Press MENU to exit.
n Note: If you receive NOAA broadcasts on more than one channel, the one
with the best reception may not be the best one for your location. Contact
your local RadioShack store or the NWS for information regarding broadcast
locations.
Setting the Alert Mode
1. Press MENU and then or to select
ALERT MODE.
2. Press SELECT and then or to select either:
• VOICE – An alert tone sounds for 10 seconds, then a vocal weather broadcast
turns on for 5 minutes with the alert description and duration displaying.
• TONE – An alert tone sounds for 5 minutes.
The alert description and duration appear on
the display. To silence the alert tone, press
WEATHER/SNOOZE.
3. Press SELECT again to confirm.
4. Press MENU to exit.
To Next Page
Loading...
Need help?
General
