Radio Shack 15-2526 - RF Modulator Setup and Operation; Package Contents and Features; Connecting the Modulator

2
Package contents
• RFModulator
• User’sGuide
Features
• EquipsyourTVwithA/Vinputs
• ConvertsanyA/Vsignalintocoaxialcableoutput
1 Connect the Modulator
Youneedthefollowingparts(notsupplied)toconnect
yourmodulatortoavideoinputsourceandyourTV:
• OneA/Vshieldedcable.Ifyourvideosource’s
audiooutputisstereo,useanA/Vcablewith
threephonoconnectorsateachend.Ifyourvideo
source’saudiooutputismono,useanA/Vcable
withtwophonoconnectorsateachend.
• Two75-ohmcoaxialcableswithF-typeconnectors.
• One75-ohm-to-300-ohmmatchingtransformer
(onlyifyourTVdoesnothaveaVHF75-ohm
terminal).
• OneS-Videocable(onlyifyourvideosourcehasan
S-Videojack).