Radio Shack 15-2526 - Page 3

3
To Stereo Video
UseastereoA/Vcabletoconnectyourmodulatortoastereo
videosource.Connectoneendofthecabletothemodulator’s
VIDEO(yellow)andL/R AUDIO(white/red)jacks.Connectthe
cable’sotherendtoyourvideosource’svideoandaudiooutput
jacks.
To Mono Video
UseanA/Vcabletoconnectyourmodulatortoamonovideo
source.Connectoneendofthecabletothemodulator’s
VIDEO (yellow)andAUDIO(white)jacks.Connectthecable’s
otherendstoyourvideosource’svideoandaudiojacks.
To S-video
IfyourvideosourcehasanS-Videojack,useanS-Videocable
toconnectthemodulator’sS-VIDEOjacktoyourvideosource’s
S-Videojack.Ifyourvideosourceisconnectedtoboththe
modulator’sVIDEOandS-VIDEOjacks,themodulatoruses
S-video.
Channel 3/4
Switch
S-Video Cable or A/V Cable
Rear View