8
If you use rechargeable Ni-Cd or
Ni-MH batteries, you can recharge
them in the radio using an optional
AC or DC adapter (both available
from your local RadioShack store).
The radio’s
CHRG
jack is only for
charging Ni-Cd or Ni-MH batteries.
Connecting an adapter will not
power the radio.
You can recharge Ni-Cd or Ni-MH
batteries inside the radio using a
6V, 60 mA AC or DC adapter and a
size H Adaptaplug
®
(neither sup-
plied). Both adapters and Adapta-
plugs are available at your local
RadioShack store.
Cautions:
You must use a
Class 2 power
source that supplies
6V DC and delivers at least 60
mA. Its center tip must be set
to positive and its plug must fit
!
21-1825.fm Page 8 Friday, March 3, 2000 12:32 PM
To Next Page
Loading...
Need help?
General
