22
Zero Adjustment
If the pointer does not normally rest exactly over
0
at the left
side of the
ACV/DC.VMA
scale, adjust the plastic screw in the
center of the tester face to bring the pointer to zero.
MEASURING VOLTAGE
WARNING:
IF YOU ATTEMPT TO MEASURE A VOLTAGE
GREATER THAN 1000 VOLTS DC OR AC, YOU MIGHT
DAMAGE YOUR METER AND EXPOSE YOURSELF TO A
SEVERE SHOCK HAZARD.
22-218.fm Page 22 Friday, August 6, 1999 11:44 AM
To Next Page
Loading...
