EasyManua.ls Logo

Radio Shack 2200813 - User Manual

Radio Shack 2200813
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2200813
User’s Guide
29-Range Digital Multimeter
Thank you for purchasing your 29-Range
Digital Multimeter from RadioShack. Please
read this user’s guide before installing, setting
up, and using your new multimeter.
Question and Answer IconNeed help?

Do you have a question about the Radio Shack 2200813 and is the answer not in the manual?

Radio Shack 2200813 Specifications

General IconGeneral
Display TypeLCD
Display Digits3.5
Voltage Range (AC)200mV to 750V
Voltage Range (DC)200mV to 1000V
Current Range (AC)200µA to 10A
Current Range (DC)200µA to 10A
Diode TestYes
Continuity TestYes
Transistor TestYes
Battery Type9V

Summary

Package Contents Overview

Product Features

Care and Maintenance

Essential Safety Precautions

Multimeter Interface and Controls

Function and Power Dial Operation

Explains how to turn the meter on/off and select measurement types.

Display and Control Buttons

Details the bar graph display, auto range mode, and select/hold buttons.

Understanding Panel Markings

Panel Voltage and Current Ratings

Clarifies the maximum voltage and current limits indicated by panel markings.

Panel Safety and Category Markings

Interprets safety icons and CAT II rating for proper usage.

Installation and Connection Setup

Battery Installation Guide

Step-by-step instructions for inserting batteries into the multimeter.

Test Lead Connection Guide

Explains how to properly attach the test leads to the multimeter jacks.

Basic Meter Operation

Selecting Measurement Ranges

Details how to choose the appropriate measurement range for accurate readings.

How to Measure DC;AC Voltage

Measuring AC Voltage on DC Bias

How to Measure DC;AC Current

How to Measure Resistance

Continuity and Diode Testing Procedures

Performing Continuity Checks

Describes how to test for electrical continuity (shorts or open circuits).

Performing Diode Checks

Guides on testing diodes, transistors, and semiconductors for functionality.

Battery Charge Testing

Additional Product Information

Fuse Replacement Guide

Step-by-step guide on how to replace a blown fuse in the multimeter.

Auto Power Off Feature

Display Test Procedure

Technical Specifications

FCC Compliance Information

Product Limited Warranty Details

Related product manuals