Radio Shack 2200813 - Battery Charge Testing

16
Operation
Checking Batteries
The meter can accurately check the following batteries under designated load conditions:
• 1.5VC
• 1.5VD
• 1.5VAA
• 1.5VAAA
• 9Vbatteries.
1. Rotate the function dial to your desired setting.
2. Connecttheblacktestleadtothebattery’snegative(–)terminal
3. Connecttheredtestleadtothebattery’spositive(+)terminal.
• If you connect the test leads in reverse polarity, – appears on the left side of the display.
Usethistabletodeterminethebattery’scharge.