Need help?Do you have a question about the Radio Shack 22-178 and is the answer not in the manual?
General| DC Voltage Ranges | 200mV, 2V, 20V, 200V, 1000V |
|---|---|
| DC Current Ranges | 200µA, 2mA, 20mA, 200mA, 10A |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ |
| Continuity Test | Yes |
| Display Digits | 3.5 digits |
| Diode Test | Yes |
| Battery Type | 9V |
| Display | LCD |
| AC Voltage Ranges | 200V |
| AC Current Ranges | 200mA, 10A |
Safety advice, symbols, and precautions for safe multimeter operation.
Latest IC, auto power off, auto-ranging, and bar-graph display.
High-speed sampling and expanded current ranges for advanced measurements.
Data hold, continuity buzzer, diode check, and auto-polarity functions.
Low-battery indicator, fold-out stand, and protective holster.
Essential safety rules for operating the multimeter.
Cautions for high voltages and advice on meter repairs.
Warning about extreme caution for users unfamiliar with electrical circuits.
Details on display, bar graph, and DC/AC voltage ranges and accuracy.
Specifies DC/AC current and resistance measurement ranges and accuracy.
Explains range control, polarity, input impedance, continuity, and battery indicators.
Overrange indication, temperature limits, power, dimensions, and included accessories.
Explains current limit (20A) and voltage limit (1kV/750V) markings.
Guide to installing batteries and using test leads.
Instructions for using alligator clips, stand, and holster.
Steps to confirm correct operation and familiarize with meter functions.
Taking accurate measurements, auto power off, range control, and data hold.
How to use the bar graph for observing measurement changes.
Step-by-step instructions for measuring DC/AC and AC with DC bias voltages.
Procedures for measuring DC/AC current and resistance.
Checking continuity and testing diodes and semiconductors.
Tips for meter care, cleaning, and replacing fuses.
To Next Page
