17
USING THE METER
Before you use the meter the first time to make a mea-
surement, follow these steps to confirm correct operation
and to familiarize yourself with the meter’s operation.
1. Press
POWER
to turn on the meter. All the display
elements briefly appear.
2. Set the selector to
V
.
3. Press
RANGE
to set the meter to the manual range
selection mode.
RH
(Range Hold) appears on the dis-
play. Press
RANGE
again. The decimal point shifts
each time you press
RANGE
. See “Manually Setting
the Range” on Page 20.
4. Use the selector to switch between the meter’s func-
tions and familiarize yourself with the displays.
(illus showing
all controls)
22-178.fm Page 17 Friday, August 6, 1999 11:38 AM
To Next Page
Loading...
