13
PREPARATION
INSTALLING BATTERIES
Your meter requires two AA batteries for power. We rec-
ommend alkaline batteries, such as RadioShack Cat. No.
23-557.
1. Turn off the power and disconnect the test leads.
2. Remove the meter from the holster.
3. Use a Phillips screwdriver to remove the screw that
secures the back cover, then lift off the cover.
4. Install the batteries as indicated by the polarity sym-
bols (+ and –) marked in the battery compartment.
5. Replace the cover and secure it with the screw.
(illustration
of removal
from holster)
(illustration)
22-178.fm Page 13 Friday, August 6, 1999 11:38 AM
To Next Page
Loading...
