Radio Shack 2200813 - Understanding Panel Markings; Panel Voltage and Current Ratings; Panel Safety and Category Markings

7
Setup
Special Panel Markings
Themaximumvoltagethatthismetercanmeasureis600VRMSACor600V
DC. To avoid electric shock and damage to the meter, do not connect the
twoinputterminals(-COM and +V.Ω.mA)toanysourcethatexceeds600
volts with respect to ground.
400mA
MAX
Themaximumcurrentthatthismetercanmeasureatthisjackis400mADCor
AC.
Caution: RISKOFELECTRICSHOCK!Refertothecompleteoperating
instructions.
Caution: Beextremelycarefulwhentakinghigh-voltagemeasurements.DO
NOTTOUCHTERMINALSORTESTLEADENDS.
CAT II ThisequipmentisratedforinstallationcategoryII(3600VAmax.).
10A MAX.
UNFUSED
Themaximumcurrentyoucanmeasureatthisjackis10ampsDC/AC.This
jackisnotfuse-protected.
The meter is protected by double insulation.
n Note: The UL mark does not indicate that this product has been evaluated by
Underwriters Laboratories for the accuracy of its readings.
600V
MAX