14
Operation
OPERATION SETTINGS
Selecting the City and Highway Modes
Your detector has two operating modes: city and highway.
In city mode, the detector requires a stronger X-, K-, or Ka-band
signal before it sounds or displays an alert.
Notes:
• City mode helps prevent false alerts in highly populated
areas, where radar signals can bounce off surrounding
structures.
• The city mode has no effect on laser alerts or instant-on
radar.
The highway mode provides maximum sensitivity for open-road
driving.
The detector is preset to highway mode and
HWY
appears on
the display when you turn it on. To select the city mode, press
CITY
.
CTY
appears. To return to the highway mode, press
CITY
again and
HWY
appears.
Selecting Display Brightness
You can select from three levels of brightness: bright, dim, and
dark. The display is preset to bright. Pressing
DIM
once reduces
the display's brightness by half. Pressing
DIM
a second time re-
duces the display's brightness by 90%. Pressing
DIM
a third
time returns display to full brightness.
To Next Page
Loading...