8
Installation
Caution:
When not in your vehicle, place your detector out of
view to help discourage theft and to protect it from high temper-
atures.
Note:
Though the detector has a 360
°
laser and radar detection
range, radar detection is more sensitive in the front range.
WINDSHIELD MOUNTING
The supplied suction-cup windshield bracket lets you easily
mount the detector on the windshield.
Caution:
Do not use the bracket in a vehicle that has a plastic
coating on the windshield designed to protect passengers dur-
ing an accident. If you use the bracket on this type of wind-
shield, you might permanently mar the windshield's surface. For
an alternative mounting method, see (“Hook-and-Loop Mount-
ing” on Page 9.)
1. Clean the selected windshield area, position the bracket on
the windshield, and press firmly on each suction cup to
secure it in place.
2. Slide the detector onto the base plate until it snaps into
place.
VOLUME/OFF
Base Plate
To Next Page
Loading...