Radio Shack 43-3905 - Install Batteries; Install Your Phone

3
b Battery Notes:
• Duringbatteryreplacement,keepthelinecordpluggedinand
replace the batteries within two minutes to maintain Caller ID
memory.
• Whenthelowbatteryiconappearsorthedisplaydims,replacethe
batteries.
• Makesurethebatteriesttightlyinthebatterycompartment.
• Disposeofoldbatteriespromptlyandproperly.
• Donotburnorburybatteries.
• Useonlyfreshbatteriesoftherequiredsizeandrecommended
type.
• Donotmixoldandnewbatteries,differenttypesofbatteries
(standard, alkaline, or rechargeable), or rechargeable batteries of
different capacities.
• Ifyoudonotplantousethephonefortwoweeksorlonger,
remove the batteries. Batteries can leak chemicals that can destroy
electronic parts.
2 Install Your Phone
Youcanmountyourphoneonawallplate,awall,orplaceiton
adeskortable.
To mount the phone to a wall plate:
1.
 Plugoneendofthe
suppliedshortmodularcord
intotheLINEjackatthe
backofthebase.
2. Plugtheotherendofthe
cordintothewallplatejack.
3. Alignthebase’skeyhole
slotswiththewallplate
studsandslidethephone
downwardtosecureit.