EasyManua.ls Logo

Radio Shack 43-140 - User Manual

Radio Shack 43-140
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Please read this Owner’s Manual before installing,
setting up and using your new phone.
www.radioshack.com
43-140
Big Button
Corded/5.8 GHz Cordless Phone
with Answering System and Caller ID
Base (1) (Wall Mount
Adapter is attached.)
Corded Handset (1)
Handset Cord (1)
Charger (1)
Cordless Handset (1)
AC Adapters (2)
Ni-Cd Battery Pack (1)
(Pre-installed)
Modular Cord (1)
Belt Clip (1)
Owner’s Manual (1)
Quick Start Guide (1)
Base (1) (Wall Mount
Ni-Cd Battery Pack (1)
What’s Included
UC044ZH_43-140_OM5.indd 1 12/18/2006 3:33:47 PM

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Radio Shack 43-140 and is the answer not in the manual?

Radio Shack 43-140 Specifications

General IconGeneral
BrandRadio Shack
Model43-140
CategoryTelephone
LanguageEnglish

Summary

Features

Corded Handset

Allows calls during AC power failure.

Handset Remote Operation

Listen to incoming messages from the cordless handset.

Visual Ringer LED

Indicates an incoming call visually.

Large Backlit Keys

Facilitates easy key pressing.

Audio Boost

Enhances high-frequency tones for better hearing.

Toll-Saver

Avoids unnecessary long-distance charges for message checks.

Message Alert

Beeps to indicate a new incoming message.

Call Waiting;Caller ID

Shows caller information during an active call.

Talking Caller ID

Announces incoming caller names verbally.

Ten-Number Memory Dialing

Stores up to ten numbers for easy dialing.

Auto Talk

Answers calls by simply lifting the handset.

Ample Talk and Standby Time

Provides extended talk and standby operational periods.

Speakerphone

Enables hands-free conversations using the base speaker.

Headset Jack

Supports an optional headset for hands-free convenience.

Introduction

Important Information

FCC Statement

Details compliance with FCC rules and regulations.

Important Safety Instructions

Important Caller ID Information

Controls & Functions

Main Base Unit - Top View

Identifies controls and buttons on the top of the base unit.

Main Base Unit - Side and Rear View

Details controls and jacks on the sides and rear of the base unit.

Cordless Handset

Identifies controls and features of the cordless handset.

Charger

Describes the charging unit and its connections.

Installation

Selecting a Location

Guidance on choosing an optimal placement for the phone base.

On a Desk Top

Step-by-step instructions for setting up the phone on a desk.

On a Wall Plate or Wall

Instructions for mounting the phone base on a wall.

Adjusting the Visual Ringer Brightness

How to set the brightness of the visual ringer indicators.

Turning Talking Caller ID On;Off

Instructions to enable or disable the voice announcement of caller ID.

Installing the Charger

Steps to connect the AC adapter to the charger base.

Connecting;Charging the Battery Pack

How to install and charge the rechargeable battery pack.

Using the Interface

Using the Base Menus

Navigating and using the menu system on the base unit.

Using the Handset Menus

Navigating and using the menu system on the cordless handset.

Base Setup

Changing the Dial Mode

How to switch between tone and pulse dialing modes.

Selecting a Language for Answering Machine and Base Display

Setting the display and voice prompt language for the answering machine and base.

Setting the Day and Time

Procedure to set the current day and time on the phone.

Adjusting the Base Display (LCD Contrast)

How to adjust the contrast of the base unit's LCD display.

Setting the Area Code

Programming the local area code for seven-digit dialing.

Setting Caller ID on Call Waiting (CIDCW)

Enabling or disabling Caller ID display during call waiting.

Handset Setup

Selecting a Language for the Handset Display

Setting the language for the cordless handset display.

Setting Auto Talk

Configuring the handset to answer calls automatically when lifted.

Checking the Area Code Setting from the Handset

Verifying the area code setting via the cordless handset.

Emergency Dialing From the Base & Cordless Handset

One-touch Speed Dialing from the Base

Speed Dialing from the Cordless Handset

Storing Names and Numbers for Speed Dialing

How to save names and phone numbers for quick dialing.

Storing Caller ID Information to Speed Dial Locations

Saving incoming caller information into speed dial memory.

Using Your Phone

During a Power Failure

Features that remain functional during a power outage.

Making and Receiving Calls

Procedures for initiating and answering phone calls.

Redialing the Last Number Dialed

How to redial the most recently dialed phone number.

Call Waiting

How to handle incoming calls when already on a call.

Adjusting Ringer, Earpiece, and Speaker Volume

Setting the volume levels for ringers, earpiece, and speaker.

Audio Boost for the Cordless Handset

Enhancing audio frequencies for clearer conversations.

Traveling Out of Range

Understanding call quality degradation and termination due to distance.

Selecting a Different Channel

Changing the handset's channel to reduce interference.

Finding the Lost Handset

Using the base to page and locate the misplaced cordless handset.

Placing a Call on Hold from the Base

How to put an active call on hold using the base unit.

Conferencing

Setting up and participating in three-way conference calls.

Intercom

Communicating between the handset and base without using the phone line.

Tone Dialing Switch Over

Switching from pulse to tone dialing for menu navigation.

Using Caller ID and CIDCW

Using the Talking Caller ID (Base Only)

Enabling voice announcements of incoming caller information.

Viewing Caller ID Information

Accessing and reviewing the history of incoming calls.

Deleting Information from the Caller ID List

Removing specific or all entries from the Caller ID history.

Setting Up the Answering Machine

Features

Overview of the answering machine's capabilities and functions.

Selecting a Language

Choosing the display and voice prompt language for the answering system.

Setting the Record Time (or Announce Only)

Configuring the duration for incoming message recording.

Activating Call Screening

Enabling the feature to listen to callers leaving messages.

Setting the Number of Rings

Determining how many times the phone rings before answering.

Activating the Message Alert

Setting up an alert tone for new voice messages.

Setting Your Greeting

Recording or selecting an outgoing message for callers.

Setting a Security Code or Personal Identification Number (PIN)

Establishing a PIN for remote access to messages.

Turning Your Answering System On & Off

How to activate or deactivate the answering system.

Reviewing Messages

Accessing and listening to recorded incoming messages.

Screening Calls

Listening to live incoming messages without answering.

Remotely Operating Your Answering Machine

Accessing answering machine functions from an external phone.

Additional Information

Installing the Belt Clip

Attaching the belt clip to the handset for portability.

Installing the Optional Headset

Connecting a compatible headset to the cordless handset.

Troubleshooting

Care

Service and Repair

Glossary

Limited One-Year Warranty

Related product manuals