Traveling Out of Range
During a call, if you move your cordless handset too far away
from your base, noise may increase. If you pass the range limits
of the base, your call will terminate within one minute.
Selecting a Different Channel
If you encounter interference while using your cordless handset,
you can manually change the handset’s channel for clear
operation. While using your handset, press DEL/CH. SCANNING
appears on the display, indicating the handset is changing to
another channel.
Finding the Lost Handset
If you misplace the cordless handset, press PAGE/HOLD on the
PAGE/HOLD on the base.
Paging is also canceled when the phone receives an incoming
call.
Placing a Call on Hold from the Base
1. During a call from the base, press PAGE/HOLD. The call will
be put on hold.
2. To return to the call, press PAGE/HOLD
again, pick up the
corded handset or press TALK on the base.
To talk to the caller from the cordless handset, press
TALK on
the cordless handset.
You can place a call on hold for ten minutes. When
ten minutes has passed, the call is disconnected,
and the phone automatically returns to standby.
You can return the corded handset to the base
while a call is on hold, and the call will remain on
hold.
•
•
To Next Page
Loading...
