Hanging up an Intercom Page
On the cordless
handset
Press SELECT/INT’COM or TALK.
With the base
speakerphone
Press TALK.
With the base
corded handset
Return the corded handset to the base.
Transferring a Call
You can transfer a call from one station to another.
1. During a call, make an intercom call to the other station; press
and hold PAGE/HOLD on the base or press SELECT/INT’COM
on the cordless handset. The call will be automatically be
placed on hold.
2. Answer the intercom page at the other station.
3. After the intercom conversation, the station transferring the
call may now hang up; the other station returns to the call and
the call is transferred.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can switch
to tone dialing after the call connects. This feature is useful when
you need tone dialing to use automated menu systems, such as
support menus, etc.
If your phone is set to pulse dialing, make your call normally.
Once your call connects, press /TONE on the base or press
/TONE/ on the cordless handset. Any digits you enter from
then on will be sent as tone dialing. When this call ends, the
phone automatically returns to pulse dialing.
To Next Page
Loading...
