Turning Talking Caller ID On/Off
Your new phone comes with a feature
called Talking Caller ID. If you subscribe
to Caller ID services from your telephone
provider and when this feature is turned
on, your base unit will announce the
name of the incoming caller when you
receive a call. You can turn this feature
on or off by moving the TALKING
CALLER ID ON/OFF switch to the on or
off position as desired.
Your phone will only be able to announce the
incoming caller names when that information is
available for that call. If a private caller rings you, the
announcement will say Private Caller.
Installing the Charger
adapter.
1. Insert the supplied AC
adapter’s barrel plug into
the DC IN 9V jack on the
bottom of the charger.
2. Route the cord through
the strain relief slot and
plug the adapter into a
standard AC outlet.
3. Before using your handset, you must charge the battery pack
Place the cordless handset on the charger face forward
to charge the battery pack. The CHARGE indicator on the
charger lights.
To Next Page
Loading...
