Setting the Record Time (or Announce Only)
You can select how long a caller has to record a message.
your personal greeting or the pre-recorded system greeting, but
prevents the caller from leaving a message.
1. Press MENU/SET
on the base.
2. Press SELECT/-
and then press MENU/SET.
3. Press
SELECT/ or SELECT/ to select Record Time 1
4. Press MENU/SET
Activating Call Screening
Your phone allows you to listen to callers leaving you a message.
1. Press MENU/SET
on the base.
2. Press
SELECT/ to move the pointer to select CALL
MENU/SET.
3. Press
SELECT/ or SELECT/ to select ON or OFF.
4. Press MENU/SET
Setting the Number of Rings
The ring time setting allows you to set the number of rings the
caller hears before your answering machine plays the outgoing
message. You can set the ring time to answer after two, four, or
six rings. If you enable the Toll Saver, the answering machine
picks up after two rings if you have new messages and after four
rings if there are none.
1. Press MENU/SET
on the base.
To Next Page
Loading...
