Setting the Area Code
If in your local calling area you can make a local call by dialing
only seven digits (instead of ten), you can program your local
area code in your phone. Calls that come from within your area
code will show only the seven-digit phone number; calls from
outside your area code will show all ten digits. To enter an area
1. Press MENU/SET
on the base.
2. Press
SELECT/
and then press MENU/SET.
3. Press the number keypad
0-9 to enter a three-digit area code.
4. If you press MENU/SET
, the stored number will be transferred
to the cordless handset. If the transfer is successful, you will
display and an error tone sounds. You will have to start over
with the procedure you are performing.
If the area code has already been stored in memory,
the stored area code will be displayed. To change it,
use (delete) and the number keys to enter the new
area code.
Setting Caller ID on Call Waiting (CIDCW)
Caller ID on Call Waiting (CIDCW) displays the name and number
of an incoming call while you are on the line.
1. Press MENU/SET
on the base.
2. Press
SELECT/ to move the pointer to select CIDCW, and
then press MENU/SET.
3. Press
SELECT/ or SELECT/ to select ON or OFF, and then
press MENU/SET
To Next Page
Loading...
